1 Introduction

1.1 Welcome!

Congratulations on your new Standard Bots Core robot.

At Standard Bots, we believe robots should elevate people’s work—not complicate it. Core was designed to deliver industrial-grade performance while remaining intuitive, accessible, and flexible to deploy. Core offers precision, reliability, and one of a kind user experience that you have come to expect from Standard Bots.

This manual is intended to provide everything you need to safely install, configure, and operate your Core robot. If questions arise at any point, our team is ready to help!

1.2 Contacting Standard Bots Support

Email: [email protected]
Phone: 1-888-9-ROBOTS
Address: Standard Bots, 35 Garvies Point Rd, Glen Cove, NY 11542

1.3 Intended Use & Limitations

The Standard Bots Core robot and control box are intended for industrial automation applications such as pick-and-place operations and other repetitive processes performed with compatible tooling. Core is designed to operate within the environmental, electrical, and mechanical constraints defined in this manual.

Core must be used exclusively with the Standard Bots controller supplied with the robot. The robot is not intended to be operated with third-party controllers, and the controller is not intended to be used with other robots.

The Core robot provides various safety settings and measures that, when implemented correctly and evaluated with a risk assessment, allow the robot to work in an unguarded collaborative environment in close proximity to humans.

Any use outside the specifications, constraints, or procedures defined in this manual is considered misuse. Prohibited applications include, but are not limited to:

Medical applications
Applications in an explosive environment
Applications where ingress protection above IP54 is required
Applications with improper safety integration or where a risk assessment has not been created and evaluated
Applications requiring a high degree of food safety

Standard Bots expressly denies any liability or expressed or implied warranty claims arising from intentional or unintentional misuse.

1.4 Warnings & Risks

1.4.1 General Information

This manual is not a comprehensive guide to robot cell design or full system integration. It does not cover the selection, validation, or integration of third-party components that may be required to create a complete and compliant automation solution.

All installations must comply with applicable local, national, and international standards and regulations in the country of use. Standard Bots does not assume responsibility for ensuring compliance of a complete installation. The system integrator or end user is responsible for verifying that all applicable safety and regulatory requirements are met.

1.4.2 Installation

Make sure to install the robot and all electrical equipment according to requirements and specifications in this manual (see Chapter 2).
The Core control box should only be connected to secure networks.
Risk Assessment: Core is provided as a partially completed machinery. As such, the robot should only be used as part of a cell after a comprehensive risk assessment has taken place.
- Aside from the robot itself, such a risk assessment may consider the robot’s payload, pinching hazards, any toxic or hazardous substances in the cell, and risks involved with sharp end effectors.
- Risk assessments must cover the entire scope of the integration, including components provided by other suppliers.
- The risk assessment will help determine any speed or force limits to set up on the robot and what safety accessories (like light curtains or area scanners) can be used. These settings are covered in Chapter 4.
- Anti-gravity (hand-guided) mode should only be used if risk assessment approves its use.
- Refer to ISO 10218-2 and ISO/TS 15066 for comprehensive guidelines.
Only trained, instructed, and otherwise qualified personnel may conduct cleaning, maintenance and repair of the robot.

1.4.3 Operator Safety

Always ensure that the robot is well-maintained and in good mechanical condition before operating it. Always inspect it before use.
Don’t wear jewelry or loose clothing when working with Core. Tie back any long hair.
Never open the control box cabinet door during operation. Never feed wires through the door; feed them through the rubber slot on the bottom of the box.
Don’t expose the robot to strong magnetic fields. This may damage the robot or cause malfunctions.
Depending on other noise in the environment where the robot is used, hearing protection may be required.
Never attempt to make any repairs, adjustments, or inspections while the robot is running.
Operators should stay alert and focused when operating the robot. Avoid distractions and keep attention on the task at hand.

1.4.4 Transportation

WARNING – Proper Transportation Required

To prevent damage during transport, the Core robot must be shipped using the supplied foam slabs and securely fastened to the crate, with all joints positioned in the designated “box position.” Transporting the Core robot outside of these conditions may result in damage.

1.4.5 Cybersecurity

The Standard Bots Core is able to connect to both wired and wireless internet in order to facilitate remote access, troubleshooting and software updates. It is imperative to follow best cybersecurity practices, as you would with any industrial device capable of being accessed online.

Secure communication: Make sure the communication channels used by your robot are encrypted and secure, so that unauthorized individuals cannot access the robot’s data or control its actions.
Strong passwords: Set strong passwords for your robot’s user accounts and ensure that they are changed regularly. Use a password manager to help you create and manage secure passwords.
Regular updates: Keep your robot’s software and firmware up-to-date, as updates often contain security patches that address vulnerabilities.
Physical security: Ensure that physical access to the robot and tablet is restricted, and that the robot is stored in a secure location when not in use.
Network security: Keep your robot on a separate network or VLAN, and restrict access to that network to only authorized users.
Regular testing: Conduct regular security testing to identify any vulnerabilities and ensure that your robot is secure.

By following these best practices, you can help ensure the security of your robot and protect it from potential cybersecurity threats.